How to have flawless floor tiles

You have purchased the most beautiful floor tiles and are ready to begin construction on the floor of your dreams. Take a deep breath and count to 10. It is just as vital to have the floor tiles placed properly as it is to choose the perfect tile since a sloppy job might detract from the beauty of your really costly tiles. Premium-quality tiles, along with proper application procedures and high-quality craftsmanship, result in flooring that is built to endure. It is critical to choose a reputable tile contractor to guarantee that the installation is completed easily and expertly. Here are some suggestions for things to keep an eye out for.

Look at the tiles.

A picture containing indoor, tiled

Before beginning the tile installation process, thoroughly inspect the floor tiles for any signs of breakage, discoloration, or hue variation. Replace the damaged tiles as soon as possible. Make certain that the contractor handles the tiles with care in order to prevent any type of harm to the surface.

It is important to note that there is a waste when cutting floor tiles for the perimeter of the floor during the tile installation process. It is possible that there is not enough room for a complete tile, in which case the tiles must be chopped to fit. It is essential to order at least 10% more tiles than necessary to account for this waste.

Additionally, when the flooring has been installed, have one or two boxes of extra tiles on hand in case there is any damage in the future. This way, if there is any damage, you will have the precise tiles for repair.

Make certain that the surface is properly prepared.

  • Have the floor fixed and leveled in order to produce a flat surface for adhering the tiles. 
  • Make certain that the surface is clean, dry, and dust-free before beginning the installation. There should be no loose debris (such as hardened cement grains) in the immediate vicinity.
  • In order to install the skirting floor tiles, the walls should be chipped up to a height of 4-6 inches (or more, depending on the situation) above the floor.

Select a design for the floor pattern.

  • If you want to mix and match two or three different kinds of floor tiles, as seen in this figure, it is critical to arrange your tiling scheme on paper beforehand. It is important to have the tiling contractor arrange the placement of these tiles ahead of time in order to prevent problems during the final tile installation.
  • Make certain that the contractor installs the tiles in such a manner that the least number of floor tiles is cut and wasted when putting tiles of a consistent pattern – for example, while installing the same kind of vitrified tiles throughout the residence.
  • If you want to mix and match two or three different kinds of tiles, as seen in this figure, it is critical to arrange your tiling scheme on paper beforehand. It is important to have the tiling contractor arrange the placement of these floor tiles ahead of time in order to prevent problems during the final tile installation.

Inspect the tile installation procedure 

  • Check to see that the floor tiles have been soaked in water for at least 30 minutes before installing them. If glue is placed directly to dry tile, the tile may absorb all of the moisture contained in the adhesive, resulting in poor tile adhesion and adhesion failure.
  • Verify that the contractor only combines a little amount of glue with water, just as much as will be needed within 30 minutes, in order to minimize loss of materials.
  • A gap of 1-2 millimetres between the tiles should be maintained for grouting, or spacers between the tiles should be used to ensure that each tile has an equal spacing between it.
  • Make certain that the skirting is installed immediately after the floor tiles have been installed in order to be able to cover any gaps that may exist between the floor tiles and the wall.

Allow for sufficient setting time.

  • The grout should only be applied by the contractor after the tile adhesive has been allowed to cure for at least 24 hours.
  • Also, during the first 24 hours, no one should be allowed to walk on the newly installed floor tiles.

Finish the grouting process.

Before the grout is applied by the contractor, be sure that the color of the grout matches the color of the tile being used. Visit to read about Four Uncommon Lessons about Floor Tiles.

Wipe down the tiles.

A picture containing indoor, floor, wall, room

If any haze or residue is left behind by the grout after it has dried, ensure that the contractor cleans the floor tiles with a damp cloth or a sponge soaked in a diluted soap solution or water after the grout has dried.

It is important to note that the contractor should avoid using any kind of acid cleansers or strong soap-based cleaners since they may spoil the floor tiles.

Last but not least, inspect the tile installation.

This may be determined by tapping the tiles – a hollow sound indicates that the tile has come loose from the foundation floor or tile adhesive, and vice versa. If you discover any such flaw, notify the contractor and request that the tiles be replaced as soon as possible.

Floor tiles vs. wall tiles: Which is better?

Floor tiles must be durable enough to withstand walking on them as well as the odd dropped object. Did you know that the strength of a tile can be measured? It’s referred to as a PEI rating.

A PEI of 1 is optimal for use on walls. Bathrooms and kitchens benefit the most at a PEI of 2. Furthermore, a PEI of 3 is suitable for all residential applications. For commercial and heavy commercial applications, PEIs 4 and 5 are appropriate. When looking for tiles, it is possible that they will not have the PEI rating shown, but there should be a note indicating whether or not they are suitable for use on floors and walls. If you don’t see a note, ask a salesperson or contact the manufacturer to confirm the information.

Is it possible to use marble and natural stone tiles as flooring?

Oh, the splendor of genuine marble! Even though marble is one of my favorite materials, would it be a decent option for your floor? This is dependent on a number of things. The first of them is the usage of the space. Marble and stone materials that are quickly worn or stained should not be used in a kitchen or other area that receives a lot of traffic and has the potential for spillage. You may, of course, seal your tiles, but the care will be much more than with porcelain or ceramic tile. However, if you are comfortable with your floors displaying signs of natural wear and patina, go ahead and do it.

Four Uncommon Lessons about Floor Tiles

Many facts are already floating around about floor tiles, according to experts’ discovery. However, a couple of things are only privy to private ears and yet produce excellent results. When you finally decide to change the floor tiles in your home or install them for the first time, you should place these ‘top secret’ ideas at the top of your list. Below are four of such unique views that can make your home interior worth it.

The Choice of Floor Tile Color

Before you assume you already know everything about the color of perfect floor tiles, pause to hear this gist. The right choice of colors for your floor can revamp your home altogether, especially if you are on a low budget. When it comes to making choices, deciding whether to use one color or the other can change the entire game. So, firstly, you should plan to coordinate the floor tile color choice of the whole room or one room at a time. 

Gloss Rectangular 50 x 80 cm Ceramic Floor Tiles, Thickness: 7-10 mm, Rs 30  /square feet | ID: 22050182648

In other words, you need not only focus on the wall tiles but also consider what you can make out of the floor. Moreover, both the wall and the floor must resonate in harmony with each other and the entire home. In addition, think about what the color of the other items is in making such choices. For instance, suppose about eh cupboards, equipment, vanity, and tapware. Do they have accent colors, or are they rather inconspicuous?

Bear in mind that if you try a neutral color, you are set for a durable arrangement for many years to come. And brightly colored floor tiles ensure enough illumination in the home through the reflective or glossy-like surfaces. The more illumination enters a room, the more spacious it feels and the more suitable it looks. In addition, color choices in floor tiles are an essential ingredient in setting up a magnificent homely look.

Double sizes or double patterns of floor tiles

Another way to create memorable adventures for everyone who steps into your home is to combine tile sizes and patterns. At times uniformity can get boring, and you may need to spice things up a bit more than the standard designs. Moreover, floor tiles can work perfectly on the floor that blends from one room to the other. For example, imagine having a different tile pattern that flows from the living room to the balcony or verandah.  Click here to read about How to have flawless floor tiles.

Gloss Digital 600x600 Double Charge Vitrified Tiles, Thickness: 10 - 12 mm,  Size: Medium, Rs 29 /square feet | ID: 13377637748

This pattern or style can also be technical and achieve adverse results, except you get a professional to handle it. At the same time, you also need to try out some recommended patterns that could blend into each other rather than a gamble. In addition, floor tiles can work for different fixing practices that may follow a standard fixing or a brick bonded or staggered way. An essential part of your tiling process for the floor requires careful planning to get great results.

A viable example is to design floor tiles with various sizes that can follow a modular pattern for each square meter of tile. Meanwhile, don’t forget that the size of the entire floor area will determine the number of grout lines that can be possible on it. On the other hand, using fewer grout lines implies creating an illusion of space, which is a perfect innovation for small room spaces. 

Ceramic or porcelain combination

In choosing the best floor tiles, you need to select the best materials that work for you. On the other hand, you should note that porcelain floor tiles are usually much more robust than ceramic floor tiles due to their higher density. As a result, it is safer and better to have porcelain tiles laid out on the exterior part of the house rather than the home interior. In addition, porcelain is not likely to soak up water, which could otherwise freeze the tiles and cause them to crack.

Wall tiling is most beautiful with large size ceramic-porcelain combination  | by Simplytiling | Medium

At the same time, the way things turn out also largely depends on the floor surface level of use. In other words, what is the story of the traffic of people that will be using floor tiles? Answering that question determines the choice between porcelain and ceramic. Moreover, you can thereby determine whether these tiles will work for domestic uses or commercial purposes. For instance, the strength of the floor tiles at home should be different from that of a shopping mall.

For such a high-traffic place like a shopping mall, you need the strength and durability of porcelain. On the other hand, in the case of domestic use, such as the kitchen, you can use ceramic tiles as the floor tiles. And if you are a contract designer, it is worth understanding the use of the proposed floor and then getting facts from the retailer before finalizing your plans and budget. In other words, you should buy from an experienced dealer and use professional counsel.

Wetroom Floor Tiles

The next part of the lessons to learn from floor tiles is the application to wetrooms in the home. When tiling a wetroom floor, there should be a gradient or slope of the floor towards the drain outflow. As a result, the designer must ensure the property is factored into the design and worked into the plan. Meanwhile, mosaic floor tiles are usually a strong enough recommendation to withstand the kind of pressure the floor takes.

Creating A Wonderful Wetroom | Tileflair

Some recommended examples include the glass mosaic tiles and the glazed porcelain, which are both fantastic choices of floor tiles. At the same time, they also provide an excellent choice due to the small sizes of the mosaic tiles. Moreover, you can make use of Split mosaics as an ideal option. In the end, your home interior deserves the best products and handling you can get.


On a final note, using floor tiles in the home also requires one last thing to note: safety is vital. Whether installing floor tiles in the home or a commercial area, there is always a need to prioritize safety above beauty or aesthetic value. The reason is, you don’t want people to slip off floor surfaces and record injuries. Therefore, when choosing floor tiles, you may also want to consider tiles with textures.